INDUCED DRAFT cooling tower
THA Side Air Discharge Cooling Tower
THA Series is an induced draft cross flow, film filled, FRP multi-cell cooling tower designed for single side air intake and side air discharge. The light weight structure and standardized components of THA cooling tower features easy transport, lifting and site installation. The nozzle-free gravitational type distribution system lowers the pump head required for the circulation pump. This series is customizable to fit in tight space constraints.
Indoor HVAC Applications:
Compared with other crossflow cooling tower, THA side discharge cooling tower are installed indoor for HVAC and Light Industrial applications:
- Fresh air enters from one side of cooling tower, and hot air discharged from another side.
- Fan are installed at the side of the cooling tower to reduce hot air recirculation at indoor.
- Unrivaled interior access for easier and safer inspections and maintenance.
- More site flexibility and safer assembly process
- Low water drift rate, down to 0.0005% of circulating water flow
Low Operating Cost:
The combination of highly effective infill and fan systems, gravity-flow water distribution, and mechanical drive systems maximizes cooling while minimizing fan power consumption.
Long Service Life:
Threcell cooling tower is built with corrosion-resistant components like hot-dip galvanized steel and fiberglass to fulfill the demanding requirements of your HVAC and light industrial applications while also providing great value.
Handrail and Caged Ladder
Provide fall protection for the climber in case slips while climbing or walking on cooling tower.
Premium Efficiency Motor (IE2 / IE3 / IE4)
Other efficiency motors are avaialble for energy saving and green building index.
Vibration Cut-Off Switch
Senses vibration and triggers alarm to shuts down the machine if vibration exceeds the threshold level.
Automatic Lubrication System
Lubricates the bearing continuously while the machine is working, which improves the distribution of lubricant.
Spring Isolators
Reduce the transmission of noise, shock, and vibration produced by mechanical equipment and cooling tower.
Gear Drive System
Gearboxes and drive shafts are available to ensure reliability and long life in the demanding environment of a cooling tower.
FRP Fan Blades
Provide the desired non-corrosive quality to the fan blades, resulting the operation of fans in the very aggressive environment.
Internal Piping
Incoming pipes are installed inside the cooling tower, which reduced piping connections for greater installation savings.
HPVC and PP Fills Material
Different infill material are used to accommodate higher temperature process water
- Provide Fall Protection for the climber in case slips while climbing or walking on cooling tower.
Premium Efficiency Motor
- Other Efficiency Motors (IE2 / IE3 / IE4) are available for energy saving and green building index.
Vibration Cut-Off Switch
- Senses Vibration and triggers alarm to shuts down the machine if vibration exceeds the threshold level.
Automatic Lubrication System
- Lubricates Bearing continuously while the machine is working, which improves the distribution of lubricant.
Spring Isolators
- Reduce Transmission of noise, shock, and vibration produced by mechanical equipment and cooling tower.
Gear Drive System
- Gearboxes and Drive Shafts are available to ensure reliability and long life in the demanding environment of a cooling tower.
FRP Fan Blades
- Provide the desired Non-Corrosive quality to the Fan Blades, resulting the operation of fans in the very aggressive environment.
Internal Piping
- Incoming pipes are installed inside the cooling tower, which Reduced Piping Connections for greater installation savings.
HPVC and PP Fills Material
- Different Infill Material are used to accommodate higher temperature process water